
The Icom IC-R71A utilizes a DFM (direct feed mixer) to make the R71A virtually immune to interference from strong adjacent signals. This, coupled with a 100 dB dynamic range, means solid performance for the casual listener or serious DXer. The receiver system is amulti-mode, quadruple conversion superheterodyne covering 100 kHz to 30 MHz with a CPU controlled, 10 Hz step VFO with 100 Hz display resolution. Advanced features include: Pass Band Tuning, IF notch, adjustable AGC, adjustable noise blanker and built-in preamplifier. The R71A also hosts a variety of user conveniences including two independent VFOs (tuners), dial lock, squelch, tone and direct keypad entry. A 32 channel scanning, tunable memory that stores frequency, VFO and mode is also built into the R71A. The rear panel has two, selectable antenna inputs: SO-239 jack and Hi-Z wire input. The top panel features a built-in speaker, plus there is an external antenna jack on the rear panel The R71A boasts even more features than the earlier R70.
(Special note: The Pass Band Tuning feature did not appear in all production units).
Frequency Range 100 - 30000 kHz
Power 117/235 VAC 50/60 Hz
Antenna Impedance 50 ohm or single wire
Selectivity (-6dB) AM 6.0 kHz, SSB 2.3 kHz
Sensitivity 0.15 µV 1.6-30 MHz SSB/CW (S+N/N=10dB)
Spurious Rejection >60 dB
Freq. Stability 30 Hz After 1 Hour
Intermediate Freqs 1st IF = 70.4515 MHz
2nd IF = 9.0115 MHz
3rd IF = 455 kHz
4th IF = 9.0115 MHz
Dimensions 11 1/4 x 4 3/8 x 10 7/8 inches
Weight 16.5 Lbs. (19 Lbs. ship)